Then, remove old trim around the CCC Unit. You need to press the button and pull it straight off. Unplug 3 sockets and again place AC Unit on the side. There are two clips on the left and right, which hold this AC controller in place. Again you need to lift plastic trim with plastic pry-bar. When you remove center console trim, unplug start/stop button…. Please be very careful not to make any scratches on the trim, neither break it. You can start from left side or right side. Using plastic pry-bar remove Center Dashboard trim. Insert new display screen into the hole in the dashboard and secure it back using two previously removed T10 Torx screws.ĬONGRATULATIONS, YOUR NEW HD DISPLAY IS ALREADY INSTALLED.ĭisassembly of old CCC Navigation Unit and Installation of new CIC Unit. Also connect new power connector to the HD screen. The other end of the cable run down in the hole towards the CCC/CIC Navigation Unit. ConnectBordeaux plug into the the same color socket at the back of the HD display screen. It is time to install brand new HD screen connector #61119185171. This is how new CID Power socket #6113 6954526 should look like (sometimes this socket has blue color). After repining 4 wires, you need to press down plastic tab at the top of the socket.

Start one by one switching wires to the holes with the same numbers:Įach time, when you plug new wire to the hole you need to hear a “click”. You will need new CID Power socket #6113 6954526. Once the old display will be out, you need to change pins in the power socket. You no longer need the display screen connector, so you can insulate this socket with black tape and hide inside the hole in the dashboard. Unplug power connector (black plug) and LVDS screen connector (silver plug).

Take out two T10 torx screws and remove old Display Screen. đ0mm socket wrench to disconnect battery terminalīEFORE YOU WILL START ANY WORK, PLEASE REMOVE CD/DVDs FROM YOUR CCC NAVIGATION UNIT AND THEN DISCONNECT NEGATIVE TERMINAL FROM THE BATTERY.ĭissassembly of old CCC Navigation Display and Installation of new Central Information Display. Various small Common and Philips screwdrivers Trim removal tool – a small plastic pry-bar

E90 ccc upgrade